Matthew N. H. Chow

Highly-localized light-matter interactions are necessary for scaling trapped-ion architectures. In hyperfine qubits, counterpropagating beams generate entangling gates by coupling with motion, but this effect is undesirable during single-qubit operations. For that reason, single-qubit gates are traditionally implemented with copropagating beams, and the coexistence of two beam geometries adds hardware and computational overhead. In an effort towards collective performance improvement with minimal overhead, we design and implement pulse-amplitude and dephasing robust dynamically corrected gates using Space Curve Quantum Control (SCQC) and compare them against the constant-amplitude gate implementation. We perform gate set tomography on a four-qubit trapped-ion register, and we discover more than 50% error reduction when robust pulses are used. We find that counterpropagating robust gates often outperform their copropagating counterparts and reach error rates as low as $(3.59 \pm 1.25)\cdot 10^{-3}$, using diamond distance as a metric. This value establishes a laser-driven-gate error reference and is merely an order of magnitude higher than the best reported $\textit{microwave}$ gate on a $\textit{single}$ ion. Additional experiments reveal that robust pulses can effectively suppress non-Markovian errors that grow during runtime. Our work challenges the widely accepted belief that copropagating gates should be preferred for their weak motional coupling and invites the adoption of high-performance robust pulses that suppress multiple noise sources of the trapped-ion error budget.

Continuously parameterized two-qubit gates are a key feature of state-of-the-art trapped-ion quantum processors as they have favorable error scalings and show distinct improvements in circuit performance over more restricted maximally entangling gatesets. In this work, we provide a comprehensive and pedagogical discussion on how to practically implement these continuously parameterized Mølmer-Sørensen gates on the Quantum Scientific Computing Open User Testbed (QSCOUT), a low-level trapped-ion processor. To generate the arbitrary entangling angles, $θ$, we simply scale the amplitude of light used to generate the entanglement. However, doing so requires careful consideration of amplifier saturation as well as the variable light shifts that result. As such, we describe a method to calibrate and cancel the dominant fourth-order effects, followed by a dynamic virtual phase advance during the gate to cancel any residual light shifts, and find a linear scaling between $θ$ and the residual light shift. Once, we have considered and calibrated these effects, we demonstrate performance improvement with decreasing $θ$. Finally, we describe nuances of hardware control to transform the XX-type interaction of the arbitrary-angle Mølmer-Sørensen gate into a phase-agnostic and crosstalk-mitigating ZZ interaction.

We analyze the use of the Solovay Kitaev (SK) algorithm to generate an ensemble of one qubit rotations over which to perform randomized compilation. We perform simulations to compare the trace distance between the quantum state resulting from an ideal one qubit $R_{Z}$ rotation and discrete SK decompositions. We find that this simple randomized gate synthesis algorithm can reduce the approximation error of these rotations in the absence of gate errors in simulation by at least a factor of two compared to a naive gate synthesis algorithm. We test the technique under the effects of a simple coherent noise model and find that it can mitigate coherent noise. We also run our algorithm on Sandia National Laboratories' QSCOUT trapped-ion device and find that randomization is able to help in the presence of realistic noise sources.

State-of-the-art noisy-intermediate-scale quantum (NISQ) processors are currently implemented across a variety of hardware platforms, each with their own distinct gatesets. As such, circuit compilation should not only be aware of, but also deeply connect to, the native gateset and noise properties of each. Trapped-ion processors are one such platform that provides a gateset that can be continuously parameterized across both one- and two-qubit gates. Here we use the Quantum Scientific Computing Open User Testbed (QSCOUT) to study noise-aware compilations focused on continuously parameterized two-qubit $\mathcal{ZZ}$ gates (based on the Mølmer-Sørensen interaction) using $\textbf{Superstaq}$, a quantum software platform for hardware-aware circuit compiler optimizations. We discuss the realization of $\mathcal{ZZ}$ gates with arbitrary angle on the all-to-all connected trapped-ion system. Then we discuss a variety of different compiler optimizations that innately target these $\mathcal{ZZ}$ gates and their noise properties. These optimizations include moving from a restricted maximally entangling gateset to a continuously parameterized one, swap mirroring to further reduce total entangling angle of the operations, focusing the heaviest $\mathcal{ZZ}$ angle participation on the best performing gate pairs, and circuit approximation to remove the least impactful $\mathcal{ZZ}$ gates. We demonstrate these compilation approaches on the hardware with randomized quantum volume circuits, observing the potential to realize a larger quantum volume as a result of these optimizations. Using differing yet complementary analysis techniques, we observe the distinct improvements in system performance provided by these noise-aware compilations and study the role of stochastic and coherent error channels for each compilation choice.

We explore the potential for hybrid development of quantum hardware where currently available quantum computers simulate open Cavity Quantum Electrodynamical (CQED) systems for applications in optical quantum communication, simulation and computing. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis-Cummings model containing N atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers: a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring N = 3 atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results can be used as a recipe for efficient and platform-specific quantum simulation of cavity-emitter systems on contemporary and future quantum computers.

We demonstrate an order of magnitude reduction in the sensitivity to optical crosstalk for neighboring trapped-ion qubits during simultaneous single-qubit gates driven with individual addressing beams. Gates are implemented via two-photon Raman transitions, where crosstalk is mitigated by offsetting the drive frequencies for each qubit to avoid first-order crosstalk effects from inter-beam two-photon resonance. The technique is simple to implement, and we find that phase-dependent crosstalk due to optical interference is reduced on the most impacted neighbor from a maximal fractional rotation error of 0.185(4) without crosstalk mitigation to $\leq$ 0.006 with the mitigation strategy. Further, we characterize first-order crosstalk in the two-qubit gate and avoid the resulting rotation errors for the arbitrary-axis Mølmer-Sørensen gate via a phase-agnostic composite gate. Finally, we demonstrate holistic system performance by constructing a composite CNOT gate using the improved single-qubit gates and phase-agnostic two-qubit gate. This work is done on the Quantum Scientific Computing Open User Testbed (QSCOUT); however, our methods are widely applicable for individual-addressing Raman gates and impose no significant overhead, enabling immediate improvement for quantum processors that incorporate this technique.

In this work, we design and implement frequency-robust Molmer-Sorensen gates on a linear chain of trapped ions, using Gaussian amplitude modulation and a constant laser frequency. We select this frequency to balance the entanglement accumulation of all motional modes during the gate to produce a strong robustness to frequency error, even for long ion chains. We demonstrate this technique on a three-ion chain, achieving $<\,1\%$ reduction from peak fidelity over a $20\,$kHz range of frequency offset, and we analyze the performance of this gate design through numerical simulations on chains of two to 33 ions.

At Sandia National Laboratories, QSCOUT (the Quantum Scientific Computing Open User Testbed) is an ion-trap based quantum computer built for the purpose of allowing users low-level access to quantum hardware. Commands are executed on the hardware using Jaqal (Just Another Quantum Assembly Language), a programming language designed in-house to support the unique capabilities of QSCOUT. In this work, we describe a batching implementation of our custom software that speeds the experimental run-time through the reduction of communication and upload times. Reducing the code upload time during experimental runs improves system performance by mitigating the effects of drift. We demonstrate this implementation through a set of quantum chemistry experiments using a variational quantum eigensolver (VQE). While developed specifically for this testbed, this idea finds application across many similar experimental platforms that seek greater hardware control or reduced overhead.

Quantum computing testbeds exhibit high-fidelity quantum control over small collections of qubits, enabling performance of precise, repeatable operations followed by measurements. Currently, these noisy intermediate-scale devices can support a sufficient number of sequential operations prior to decoherence such that near term algorithms can be performed with proximate accuracy (like chemical accuracy for quantum chemistry). While the results of these algorithms are imperfect, these imperfections can help bootstrap quantum computer testbed development. Demonstrations of these algorithms over the past few years, coupled with the idea that imperfect algorithm performance can be caused by several dominant noise sources in the quantum processor, which can be measured and calibrated during algorithm execution or in post-processing, has led to the use of noise mitigation to improve computational results. Conversely, benchmark algorithms coupled with noise mitigation can help diagnose the nature of noise, whether systematic or purely random. Here, we outline the use of coherent noise mitigation techniques as a characterization tool in trapped-ion testbeds. We perform model-fitting of the noisy data to determine the noise source based on realistic noise models and demonstrate that systematic noise amplification coupled with error mitigation schemes provides useful data for noise model deduction. Further, in order to connect lower level noise model details with application specific performance of near term algorithms, we experimentally construct the loss landscape of a variational algorithm under various injected noise sources coupled with error mitigation techniques. This type of connection enables application-aware hardware codesign, in which the most important noise sources in specific applications, like quantum chemistry, become foci of improvement in subsequent hardware generations.

Most near-term quantum information processing devices will not be capable of implementing quantum error correction and the associated logical quantum gate set. Instead, quantum circuits will be implemented directly using the physical native gate set of the device. These native gates often have a parameterization (e.g., rotation angles) which provide the ability to perform a continuous range of operations. Verification of the correct operation of these gates across the allowable range of parameters is important for gaining confidence in the reliability of these devices. In this work, we demonstrate a procedure for sample-efficient verification of continuously-parameterized quantum gates for small quantum processors of up to approximately 10 qubits. This procedure involves generating random sequences of randomly-parameterized layers of gates chosen from the native gate set of the device, and then stochastically compiling an approximate inverse to this sequence such that executing the full sequence on the device should leave the system near its initial state. We show that fidelity estimates made via this technique have a lower variance than fidelity estimates made via cross-entropy benchmarking. This provides an experimentally-relevant advantage in sample efficiency when estimating the fidelity loss to some desired precision. We describe the experimental realization of this technique using continuously-parameterized quantum gate sets on a trapped-ion quantum processor from Sandia QSCOUT and a superconducting quantum processor from IBM Q, and we demonstrate the sample efficiency advantage of this technique both numerically and experimentally.