Winfried K. Hensinger

Modern platforms for potential qubit candidates, such as trapped ions or neutral atoms, allow long range connectivity between distant physical qubits through shuttling. This opens up an avenue for transversal logical CNOT gates between distant logical qubits, whereby physical CNOT gates are performed between each corresponding physical qubit on the control and target logical qubits. However, the transversal CNOT can propagate errors from one logical qubit to another, leading to correlated errors between logical qubits. We have developed a multi-pass iterative decoder that decodes each logical qubit separately to deal with this correlated error. We show that under circuit-level noise and only $\mathcal{O}(1)$ code cycles, a threshold can still persist, and the logical error rate will not be significantly degraded, matching the sub-threshold logical error rate scaling of $p^{\lfloor\frac{d}{2}\rfloor}$ for a distance $d$ rotated surface code.

Noise resilience of quantum information processing is a crucial precondition to reach the fault-tolerance threshold. While resilience to many types of noise can be achieved through suitable control schemes, resilience to amplitude noise seems to be elusive within the common harmonic approximation for the bus mode of trapped ions. We show that weak an-harmonicities admit control schemes that achieve amplitude noise-resilience consistent with state-of-the-art experimental requirements, and that the required an-harmonicities can be achieved with current standards of micro-structured traps or even the intrinsically an-harmonic Coulomb interaction. This approach applies broadly to any platform that employs a bosonic bus as a qubit coupler.

Optimal quantum control of continuous variable systems poses a formidable computational challenge because of the high-dimensional character of the system dynamics. The framework of quantum invariants can significantly reduce the complexity of such problems, but it requires the knowledge of an invariant compatible with the Hamiltonian of the system in question. We explore the potential of a Gaussian invariant that is suitable for quadratic Hamiltonians with any given number of motional degrees of freedom for quantum optimal control problems that are inspired by current challenges in ground-state-to-ground-state shuttling of trapped-ions.

A major obstacle in the way of practical quantum computing is achieving scalable and robust high-fidelity entangling gates. To this end, quantum control has become an essential tool, as it can make the entangling interaction resilient to sources of noise. Nevertheless, it may be difficult to identify an appropriate quantum control technique for a particular need given the breadth of work pertaining to robust entanglement. To this end, we attempt to consolidate the literature by providing a non-exhaustive summary and critical analysis. The quantum control methods are separated into two categories: schemes which extend the robustness to (i) spin or (ii) motional decoherence. We choose to focus on extensions of the $σ_x\otimesσ_x$ Molmer-Sorensen interaction using microwaves and a static magnetic field gradient. Nevertheless, some of the techniques discussed here can be relevant to other trapped ion architectures or physical qubit implementations. Finally, we experimentally realize a proof-of-concept interaction with simultaneous robustness to spin and motional decoherence by combining several quantum control methods presented in this manuscript.

A major challenge for quantum computers is the scalable simultaneous execution of quantum gates. One approach to address this in trapped ion quantum computers is the implementation of quantum gates based on static magnetic field gradients and global microwave fields. In this paper, we present the fabrication of surface ion traps with integrated copper current carrying wires embedded inside the substrate below the ion trap electrodes, capable of generating high magnetic field gradients. The copper layer's measured sheet resistance of 1.12 m$Ω$/sq at room temperature is sufficiently low to incorporate complex designs, without excessive power dissipation at high currents causing a thermal runaway. At a temperature of 40 K the sheet resistance drops to 20.9 $μΩ$/sq giving a lower limit for the residual resistance ratio of 100. Continuous currents of 13 A can be applied, resulting in a simulated magnetic field gradient of 144 T/m at the ion position, which is 125 $μ$m from the trap surface for the particular anti-parallel wire pair in our design.

Microfabricated ion-trap devices offer a promising pathway towards scalable quantum computing. Research efforts have begun to focus on the engineering challenges associated with developing large-scale ion-trap arrays and networks. However, increasing the size of the array and integrating on-chip electronics can drastically increase the power dissipation within the ion-trap chips. This leads to an increase in the operating temperature of the ion-trap and limits the device performance. Therefore, effective thermal management is an essential consideration for any large-scale architecture. Presented here is the development of a modular cooling system designed for use with multiple ion-trapping experiments simultaneously. The system includes an extensible cryostat that permits scaling of the cooling power to meet the demands of a large network. Following experimental testing on two independent ion-trap experiments, the cooling system is expected to deliver a net cooling power of 111 W at ~70 K to up to four experiments. The cooling system is a step towards meeting the practical challenges of operating large-scale quantum computers with many qubits.

The cost of enabling connectivity in Noisy-Intermediate-Scale-Quantum devices is an important factor in determining computational power. We have created a qubit routing algorithm which enables efficient global connectivity in a previously proposed trapped ion quantum computing architecture. The routing algorithm was characterized by comparison against both a strict lower bound, and a positional swap based routing algorithm. We propose an error model which can be used to estimate the achievable circuit depth and quantum volume of the device as a function of experimental parameters. We use a new metric based on quantum volume, but with native two qubit gates, to assess the cost of connectivity relative to the upper bound of free, all to all connectivity. The metric was also used to assess a square grid superconducting device. We compare these two architectures and find that for the shuttling parameters used, the trapped ion design has a substantially lower cost associated with connectivity.

A proposal for a phase gate and a Mølmer-Sørensen (MS) gate in the dressed state basis is presented. In order to perform the multi-qubit interaction, a strong magnetic field gradient is required to couple the phonon-bus to the qubit states. The gate is performed using resonant microwave driving fields together with either a radio-frequency (RF) driving field, or additional detuned microwave driving fields. The gate is robust to ambient magnetic field fluctuations due to an applied resonant microwave driving field. Furthermore, the gate is robust to fluctuations in the microwave Rabi frequency and is decoupled from phonon dephasing due to a resonant RF or a detuned microwave driving field. This makes this new gate an attractive candidate for the implementation of high-fidelity microwave based multi-qubit gates. The proposal can also be realized in laser-based set-ups.

The optimisation of two-dimensional (2D) lattice ion trap geometries for trapped ion quantum simulation is investigated. The geometry is optimised for the highest ratio of ion-ion interaction rate to decoherence rate. To calculate the electric field of such array geometries a numerical simulation based on a "Biot-Savart like law" method is used. In this article we will focus on square, hexagonal and centre rectangular lattices for optimisation. A method for maximising the homogeneity of trapping site properties over an array is presented for arrays of a range of sizes. We show how both the polygon radii and separations scale to optimise the ratio between the interaction and decoherence rate. The optimal polygon radius and separation for a 2D lattice is found to be a function of the ratio between rf voltage and drive frequency applied to the array. We then provide a case study for 171Yb+ ions to show how a two-dimensional quantum simulator array could be designed.

Ion traps offer the opportunity to study fundamental quantum systems with high level of accuracy highly decoupled from the environment. Individual atomic ions can be controlled and manipulated with electric fields, cooled to the ground state of motion with laser cooling and coherently manipulated using optical and microwave radiation. Microfabricated ion traps hold the advantage of allowing for smaller trap dimensions and better scalability towards large ion trap arrays also making them a vital ingredient for next generation quantum technologies. Here we provide an introduction into the principles and operation of microfabricated ion traps. We show an overview of material and electrical considerations which are vital for the design of such trap structures. We provide guidance in how to choose the appropriate fabrication design, consider different methods for the fabrication of microfabricated ion traps and discuss previously realized structures. We also discuss the phenomenon of anomalous heating of ions within ion traps, which becomes an important factor in the miniaturization of ion traps.

We present the design and operation of an ytterbium ion trap experiment with a setup offering versatile optical access and 90 electrical inter-connects that can host advanced surface and multi-layer ion trap chips mounted on chip carriers. We operate a macroscopic ion trap compatible with this chip carrier design and characterise its performance, demonstrating secular frequencies >1 MHz, and trap and cool nearly all of the stable isotopes, including 171Yb+ ions, as well as ion crystals. For this particular tap we measure the motional heating rate, <n-dot>, and observe a <n-dot> proportional to 1/omega^2 behaviour for different secular frequencies, omega. We also determine a spectral noise density S_E(1 MHz) = 3.6(9)x10^-11 V^2 m^-2 Hz^-1 at an ion electrode spacing of 310(10) mu m. We describe the experimental setup for trapping and cooling Yb+ ions and provide frequency measurements of the 2S_1/2 - 2P_1/2 and 2D_3/2 - 3D[3/2]_1/2 transitions for the stable 170Yb+, 171Yb+, 172Yb+, 174Yb+ and 176Yb+ isotopes which are more precise than previously published work.

For many quantum information implementations with trapped ions, effective shuttling operations are important. Here we discuss the efficient separation and recombination of ions in surface ion trap geometries. The maximum speed of separation and recombination of trapped ions for adiabatic shuttling operations depends on the secular frequencies the trapped ion experiences in the process. Higher secular frequencies during the transportation processes can be achieved by optimising trap geometries. We show how two different arrangements of segmented static potential electrodes in surface ion traps can be optimised for fast ion separation or recombination processes. We also solve the equations of motion for the ion dynamics during the separation process and illustrate important considerations that need to be taken into account to make the process adiabatic.